Drivers Ceton USB Devices



The last available Ceton Drivers & Firmware

For all Ceton InfiniTV products: The Ceton InfiniTV installer will install current Windows drivers for all InfiniTV devices, as well as Switched Digital Video Host software and Tuning Adapter drivers.

  • 2019-04-01 FiiOUSBDACDriver-V4.47.0.exe 끂 91341 2.22 MB 2019-04-01 Installation and usage guide of the new generic USB DAC driver for FiiO players & DAC.pdf.
  • Improvements and fixes. This update includes a fix for an incorrect device driver (“Microsoft – WPD – 2/22/2016 12:00:00 AM - 5.2.5326.4762”) that was released by a third-party on March 8, 2017 that affected a small group of users with USB connected phones or other media devices that rely on Media Transfer Protocol (MTP).

Multiple Video Feeds On A Single Screen

Ceton Infinitv Windows 7 Drivers

Beta drivers are provided by Ceton as a preview release. Beta drivers are under qualification testing and may include significant issues. It is the end user's responsibility to protect their system and data when using any Beta driver. It is strongly recommended that end users back up all the data prior to using Beta drivers from this site. Driver for DataStick Pro Driver for DataStick Sport User Manual for USB Flash Drive Compact Flash FAQ Are USB3.0 drives backward compatible with USB2.0 computers & other devices? Secure Digital Memory card is write protected or locked Do centon flash devices require drivers Replacement Caps for USB.

Infinitv

Final version of the drivers for Windows 7

ceton_infinitv_setup_w7_sp1_13_06_03_1088.exe

Ceton Infinitv Win 8 / Win 10 Drivers
Drivers Ceton USB Devices

Final version of the drivers for Windows 8 / Windows 10

Drivers Ceton USB Devices

ceton_infinitv_setup_w8_13_06_03_1088.exe

Ceton Infinitv Firmware 14_4_6_21
Ceton Infinitv Firmware 15_1_13_152

Comments

comments

-->Multiple video feeds on a single screen

Symptoms

Consider the following scenario:

  1. You connect a Universal Serial Bus (USB) audio device, such as an audio adapter or USB digital-to-analog converter (DAC), to a Windows 10 Version 1703-based computer for the first time.
  2. The operating system detects the device and loads the standard USB audio 2.0 driver (usbaudio2.sys).
  3. Windows then downloads the device-specific driver from Windows Update.
  4. The downloaded device driver replaces the usbaudio2.sys driver.

In this scenario, the device cannot be used, and the computer does not have sound. The speaker icon on the task bar is marked with an X mark. When you select the icon, you receive the following message:

Ceton Infinitv Windows 10

Audio services not responding. Both the Windows Audio and the Windows Audio End Point Builder services must be running for audio to work correctly.

Cause

This 'audio not playing' problem occurs because the default USB audio 2.0 driver (usbaudio2.sys) uses the WaveRT port for operation but the device-specific driver does not. However, both drivers use the 'wave' reference string when the device interface is registered.When the device-specific driver replaces the default driver, the device interface that is created by usbaudio2.sys is still used because the reference strings overlap. Therefore, the operating system assumes that the new driver also supports the WaveRT port. Because the new driver does not support the WaveRT port, the system cannot access the driver.

Resolution

Green Icon With '+' Next To It?

To fix this problem, use one of the following methods.

Method 1

Uninstall the device. To do this, follow these steps:

  1. Open Device Manager.
  2. Select and hold (or double-click) the name of the device, and then select Uninstall.

Note:In step 2, don't select the Delete the driver software for this device check box.

Ceton Tuner Drivers

Method 2

Connect the device to a different USB port. The problem may not occur if the device is connected to a different USB port.

Method 3

Ceton Drivers Windows 10

If the device is not yet connected, install the device-specific driver first. You can do this by using the appropriate installer for the device. Then, connect the device. Windows now selects the device-specific driver instead of the default USB audio 2.0 driver. This method works in this situation because the problem occurs only if the device-specific driver replaces the default driver after the device is connected.

See Also